ULTRA SMALL HIGH SPEED and HIGH SENSITIVITY THRESHOLD DETECTOR

Features:	•	State of Art Thin Film Technology
	•	Extremely Fast Response
	•	Very Wide Dynamic Range
	•	Very Wide Frequency Range
	•	Extremely Small Size (0.185 cu. In.)
	•	Can Be Mounted on a PC Board by removing Output SMA Connector

Applications:	•	Radar Receivers
	•	ECM Systems
	•	Lab or Off Air Signal Detection & Data Processing
	•	High Speed Data Processing (Data Rate of up to 100 MBPS)

Specifications
Frequency Range	18 – 40 GHz	To meet the following Environmental Conditions: Operating Temp.: -40 to +85°C Storage Temp.: -54 to +105°C Mechanical Shock: Per MIL-STD-810F, Method 516.5 Vibration: Per MIL-STD-810F, Method 514.5 Humidity: Per MIL-STD-810F, Method 507.4 Material: SS303 Finish: Gold Plating per MIL-G-45204B Power Supply: +12 to +15V @ 150 mA max – 12 to -15V at 50 mA max
Dynamic Range Threshold Setting Pulsed Signal	-30 to -15 dBm -26 to +10 dBm
Flatness	±1.5 dB max.
Propagation Delay	2 nsec. typ., 5 nsec. max.
Output	ECL compatible
Pulse Stretching	30 nsec. max.
VSWR	2.5:1 typ
Threshold Uncertainty	±0.75 dB max
Threshold Setting	0 to 4 volts
Pulsed signal should be at least 4dB above the threshold setting. Pulse response is 10 nsec. to CW. Max Input Power without damage is +15 dBm. Voltage Control Pin (V.C.) sets the threshold setting and can be set externally by the user. The unit is preset to minimum level internally. It is not necessary to use the pin (V.C) unless the threshold setting needs to be higher than specified min. level. To set the threshold setting to a higher level also improves response time.